A beautifully installed vanity can completely transform a bathroom, and at Water Tight Canberra, we make sure it’s done right the first time. For this Red Hill project, our team was called in to remove an old vanity and install a customer-supplied replacement. The result? A flawless, fully functional installation that matched the homeowner’s design vision perfectly.
The Challenge: Customer-Supplied Vanity Needing Expert Installation
The Red Hill homeowners were completing a stylish bathroom renovation and needed their new vanity professionally installed. While the unit had been supplied by the customer, they required a licensed plumber Canberra to handle the plumbing connections, alignment, and compliance checks.
Incorrect vanity installation can cause hidden leaks, wall damage, or poor drainage, problems that often appear months later. In older homes around Red Hill, it’s also common to find outdated trap fittings or misaligned waste outlets that don’t match new vanity configurations.
To ensure their project was finished to a professional standard, the homeowners turned to the highly rated team at Water Tight Canberra.
Assessment
Brayden, one of our experienced bathroom plumbing specialists, inspected the existing vanity and plumbing connections. He checked alignment against the tiled wall and ensured the water supply lines and waste outlet were positioned correctly for the new basin unit.
Because the vanity was customer-supplied, the team verified that fittings met Australian Standards (AS/NZS 3500) and that connections could be made without altering the existing plumbing infrastructure.
This preparation ensured a smooth, efficient installation process, avoiding costly rework or wall damage often caused by unverified fittings or poor-quality tapware.
What We Did
Brayden began by carefully removing the existing vanity, isolating water supply lines and and performing thorough leak detection while checking for burst pipes or corrosion. Once clear, he:
- Installed new isolation valves and upgraded trap fittings.
- Replaced all waste components with Reece-supplied DWV pipework, bends, and couplings to ensure a watertight seal.
- Fitted a new pop-up waste and P-trap assembly to suit the single-bowl vanity configuration.
- Resealed around the basin using Atomik K&B white acetic silicone for a clean, durable finish.
- Reconnected hot and cold water lines with Arco RA BV mini stop taps for reliable shutoff.
After installation, Brayden tested the basin under pressure, ensuring there were no leaks, and confirmed the waste flow rate met compliance.
Throughout the process, he maintained clear communication with the homeowners, confirming each stage of the job and leaving the bathroom spotless upon completion.
Materials & Standards
All fittings and materials were sourced from Reece Plumbing Canberra, including high-quality DWV PVC components, mini stop valves, and chrome pop-up wastes.
The installation was completed in full compliance with AS/NZS 3500 Plumbing and Drainage standards, ensuring long-term reliability, ease of maintenance, and warranty protection for both materials and workmanship.
Our attention to detail extended to the final alignment and sealing of the vanity, achieving a seamless integration with the homeowner’s black-and-white tile design.
Results
Before: Outdated vanity with worn fittings and unreliable seals.
After: Modern, fully functional single-bowl vanity, flawlessly installed, watertight, and tested to professional standards.
The homeowners couldn’t have been happier with the finished result, leaving this glowing 5-star Google review:
“Thank you to Brayden and the cheerful Water Tight team. We have always had expert professional service from them all. Every job is done perfectly. Definitely recommend.” — Homeowner, Red Hill ACT
Another elegant bathroom upgrade, another perfect 5-star result from Canberra’s most reliable plumbing team. From emergency plumber services and hot water system repairs to blocked drain Canberra solutions, we’ve got every plumbing need covered.
Tips
When supplying your own vanity, always ensure it meets Australian standards and is designed for the correct waste configuration (P-trap or S-trap). A licensed plumber should always handle the connection and sealing, preventing leaks and protecting your warranty.
Do you need renovations to your bathroom, toilet or kitchen? Water Tight Canberra is your trusted plumbing partner. Whether working with you directly or alongside a builder, we help keep your project on time, on budget, and hassle-free.
Location Notes
Red Hill’s mix of heritage and modern homes means plumbing renovations often involve adapting older pipework to meet new fixture layouts. As a leading plumber in Woden, we regularly help Red Hill residents modernise their bathrooms with quality installations that balance aesthetics and performance. Contact us today on (02) 6195 9991 for all your plumbing requirements.
Gallery
“Every job is done perfectly. Definitely recommend.” — Homeowner, Red Hill ACT
